Curticat Electric Fence

For installation of roller insulators at corner posts, trees, etc.  Ensures there will be no pull-out under high tension, and works well on trees where the surface is not flat, and screws are not secure.

Hookup wire is always necessary, but you may choose to use a lower price product.  This wire is great because of it’s flexibility, and the fact that it is copper.  The fencing braid is also copper, so it makes a compatible connection to the hook-up wire without the use of a dissimilar metal transition connector, often called a neutral plate connector, or hook-up connector. Additionally, many products on the market for this purpose are solid core (not stranded) and very stiff and difficult to work with.

Copper split bolt connectors with cable ties. To splice and terminate braid and for electrical connections.

This is a required item to test your fence voltage. Note: standard volt meters cannot measure the “pulse” voltage of electric fence chargers.
 

Bags of 25
Line Post Insulators may be used rather than the more costly Roller Insulators, for line posts, or simply to insulate the braid from coming into contact with anything that might otherwise ground it, such as the cross beam of an H-Braced Corner Post.
They are available in either black or white for the same price.

ElectroBraid™ rope is made from high quality braided polyester fibers that won’t unravel or break. The high strength braid protects the copper wire conductors that are formed in helical coils like springs to allow for bend and stretch.  The copper wires won’t break up to 1,000 pounds tension.

For use with Fiberglass Mule Posts, at corners and ends.  These connectors come with and fasten to the post with machine screws, and nuts.
Bags of 12

The tension kit is a required tool for tensioning the Braid. Note: Never use machinery to tension the Braid.

ElectroBraid™ 2.5 JouleFor up to 3 miles of ElectroBraid™ Fence
ElectroBraid™ 6.0 JouleFor up to 5 miles of ElectroBraid™ Fence
ElectroBraid™ 11.0 JouleFor up to 8 miles of ElectroBraid™ Fence

Suggested for 4′ Fence
Pre-Drilled, Solid Core Drivable Rod, 7/8″ X 5′
SunGUARD II Coated. Will Not Splinter

3⁄8″ x 4′ Step-In 4-Clip Post

Copper Ground Rod and Ground Wire Clamp.
Used to ground the system along with copper hook-up wire.

These clips quickly install on the fiberglass post of matching diameter.
20 Clips per package

The roller style insulators are easy to install with either 2.5 in screws (Shown), or with the webbing and nails (or 1.5″ screws) for additional freedom of movement and better pull-out strength at corners and end-posts.  The roller separates from the bracket to allow insertion of the Electrobraid rope without the need for a free end.  The free floating roller design also makes tensioning easy, even around corners.

SpeedRite 1000 with 10 Watt Solar Panel
Delivers 1 output joule in a mains or battery configuration for up to 1 mile of ElectroBraid™ Fence (battery not Included).
The recomended battery is a 12Volt 50 Amp Hour Gell Cell Battery which should be purchased locally due to the hazardous materials shipping status.The recomended battery is a 12Volt 50 Amp Hour Gell Cell Battery which should be purchased locally due to the hazardous materials shipping status.  Deep cycle batteries are recommended for use in solar systems, as they are more suited to the repetitive power draining and recharging that can occur in solar systems.  Included solar panel assumes a minimum of 4 Peak Sun Hours per day.  Larger panels may be required where sunshine is scarce.

SpeedRite 2000 with 20 Watt Solar Panel
Delivers 2 output joules in a mains or battery configuration for up to 2 miles of ElectroBraid™ Fence (battery not Included).
TThe recomended battery is a 12Volt 50 Amp Hour Gell Cell Battery which should be purchased locally due to the hazardous materials shipping status.The recomended battery is a 12Volt 50 Amp Hour Gell Cell Battery which should be purchased locally due to the hazardous materials shipping status.  Deep cycle batteries are recommended for use in solar systems, as they are more suited to the repetitive power draining and recharging that can occur in solar systems.  Included solar panel assumes a minimum of 4 Peak Sun Hours per day.  Larger panels may be required where sunshine is scarce.

SpeedRite 3000 with 40 Watt Solar Panel
Delivers 3 output joules in a mains or battery configuration for up to 3 miles of ElectroBraid™ Fence (battery not Included).
The recomended battery is a 12Volt 105 Amp Hour Gell Cell Battery which should be purchased locally due to the hazardous materials shipping status.  Deep cycle batteries are recommended for use in solar systems, as they are more suited to the repetitive power draining and recharging that can occur in solar systems.  Included solar panel assumes a minimum of 4 Peak Sun Hours per day.  Larger panels may be required where sunshine is scarce.

For allowing up to a 20′ entry without the expense of a gate or labor involved with stabilizing a gate post.  Allows easy access for heavy equipment.
One Gate Kit is needed for every strand of fence. 
Includes Gate Handle and Activator plate,1 Roller Insulator, webbing, 2 copper splitbolts, and two 1″ Stainless Steel Screws

To Warn Visitors That The Fence is Electric
 
The Brilliant Yellow Color attracts attention that the fence is electrified.  The heavy plastic easily attaches to the braid strand.